You've probably already experienced a power supply interruption minutes before your work was about to be automatically saved. Almost all your work has vanished, and you have to start all over again. Such tragic scenarios can be averted by the APC Smart-UPS 1500 VA LCD RM 2U 230 V with SmartConnect rack-mount replacement backup source. This hardware is practically a premium battery backup that powers all appliances needing electricity. The APC Smart-UPS 1500 VA LCD RM 2U 230 V with SmartConnect rack-mount UPS battery backup has the Line interactive design approach. Off-line is seen as the simplest form in case of a outage because it switches power to the UPS unit itself. The line interactive UPS enhances the simpler off-line version of data line surge suppression to prevent damage from electrical surges from the grid.
A key parameter is the battery run time. This depends on the power consumption of the connected electronics – for example, at half-load (50%), the backup time will be three times longer. The load of the UPS defines the operating time, which at full load (100%) is 7,2 min and at half the energy consumption, it is 26,8 min. It is therefore essential to calculate the power consumption of the connected appliances and ideally to have a bit of energy extra left. The APC Smart-UPS 1500 VA LCD RM 2U 230 V with SmartConnect rack-mount specifies the apparent power as 1500, but in reality, the actual usage matches the value of 1000 W.
Specifications can be changed without notice. Images are for illustrative purposes only.