Computers and Laptops Gembird – same-day delivery available. Just make sure the product you want is in stock. Choose products to buy from the comfort of your home and have them delivered to your address, to an AlzaBox, or to one of our stores. Learn more about why shop on Alza.de.
Continue
Best Sellers
1.
Gembird TPE Flexible Filament Black
In stock > 5 pcs
Filament - made from TPE, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 40°C, recommended print speed: from 40mm/s to 60mm/s
70
Results
WiFi Booster , 802.11/b/g/n, up to 300 Mb/s, WEP 64bit, WEP 128bit, WPA and WPA2
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from TPE, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 40°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Power Cable connecting, 1,8m, male connectors: 1× IEC C6 (cloverleaf), 1× fork Type E, bent connector ends
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 90°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from ABS, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from TPE, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 40°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 90°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from ABS, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from TPE, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 40°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from ABS, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 100°C, recommended print speed: from 40mm/s to 60mm/s
Power Cable connecting, 0,3m, male connectors: 1× SATA (Serial ATA), female connectors 1× SATA (Serial ATA)
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Surge Protector - 1,5m, male connectors: 1× type F fork, female connectors: 5× fork Type E, shock power capacity: 250 J, maximum current load: 16 A, peak current: 9000 A, LED indication up to 16 A
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 90°C, recommended print speed: from 40mm/s to 60mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
